User's Manual

Operating & Maintaining the Objet500 - Connex 3 3D Printer
6–48 DOC-07000 Rev. A
9. Closethewastecompartmentdoor.
Cleaning the
Exterior Panels
ThepaintedexteriorplasticpanelsofObjet3‐Dprintershaveadurable
finish,offeringexcellentchemicalresistancetocommoncleaningagents.
However,followtherecommendationsbelowwhencleaningthesearea sof
theprinter.
AcceptableCleaningAgents
• mildsoapsolution
• commonhouseholdcleanersandwindowcleaners
• commoncommercialandindustrialdetergents,5%solutioninwater
• alcohol(ethanol,isopropanol),10%to40%solutioninwater
Wipetheexterioroftheprinter,usingasoftclothmoistenedwiththe
cleaningsolution.
UnacceptableMaterials
• industrialsolvents
• cleaningagentscontaininghydrocarbons,ketones,estersandlacquer
thinners
• spraydisinfectants
• abrasivesandagentswhichcouldwearawaythepanelfinish
Dispose of the full waste container in accordance with environmental and
safety requirements.