User's Manual

DOC-07000 Rev. A 6–39
Objet500 - Connex 3 User Guide
12. ReconnectthepowerconnectiontotheUVlamp.
Figure 6-54: Connecting power to the UV lamp
13. Inthewizardscreen,confirmthatyouhavereplacedthelamp(s)and
thattheblackstripisattached,thenclick
Next.
Figure 6-55: UV-installation confirmation screen
Thewizardoperatesthelampsandchecksiftheirpoweriswithinthe
acceptablerangeforeachprintingmode.(Themodecurrentlybeing
checkedappearsinthelower‐leftcorneroftheprinterinterface.)
Figure 6-56: Status screen during UV lamp check