User's Manual

DOC-07000 Rev. A 6–37
Objet500 - Connex 3 User Guide
5. DisconnectthepowerconnectiontotheUVlamp.
Figure 6-49: Disconnecting the UV lamp
Note: Do not disconnect the power connection to the cooling fans.
6. LoosenthescrewsecuringtheUVlampcover(A),andpullthecover
up
(B),thenout(C).
Figure 6-50: Removing the UV lamp cover
7. Pullthelampreflectoroutoftheprintblock.
Figure 6-51: Removing the UV lamp reflector