User's Manual

DOC-07000 Rev. A 6–35
Objet500 - Connex 3 User Guide
2. StarttheHeadOptimizationWizardfromtheOptionsmenuofthe
printerinterface.
Figure 6-44: Starting the Head Optimization Wizard
3. Intheopeningwizardscreen,clickNexttobegin.
TheWizardConditionsscreenappears.
4. Readtheconditions,selectIAgreeandclick
Next.
5. Inthefollowingscreen,makesureOptimizeallprintheadsisselected,
andclickNext.
Figure 6-45: Procedure selection screen
Replacing the
Odor Filter
Iftheprinterexhaustisnotconnectedtoanexternalventilationsystem,a
built‐inactivated‐carbonfilterremovesodorsfromprintingmaterials.This
filtershouldbereplacedregularly(aboutonceayear,asnecessary)tokeep
yourworkingenvironmentpleasant.Thisisnormallydoneduringthe
yearlypreventive‐maintenanceservice
visit.
Replacing the
UV Lamps
TheUVlampsusedforcuringmodelshavealong,butlimited,working
life.TheObjetserviceengineertestseffectivenessduringregular
maintenancechecks,andreplacesthem,ifnecessary.Youcantestand