User Guide


Site Preparation Guide Site Prep Tasks
Page 2
Site Prep Tasks
Selecting the Site
Decide where to install the printer based on the following:
1. Space Requirements
2. Environmental Requirements
3. Electrical Requirements
4. LAN Requirements
The F120 printers are capable of generating vibrations depending mainly on part
build geometry and material characteristics. This consideration will need to be
taken into account if locating the printer near vibration sensitive equipment.
Physical Specifications and Space Requirements
Dimensions and Weights
Make sure that the installation site floor space can accommodate the printer’s weight and
dimensions, plus required clearances. The installation location must be a flat level surface that
is stable and capable of holding 500 pounds (227 kg).
Caution:
Due to the physical size and weight of the F120 printer, it is recommended to use
a fo
rklift when positioning the printer.
If a table is used to support the printer, the recommended height is 30 inches ± 3
inches (76 cm ± 7.6cm) and it should be capable of holding 500 pounds (227 kg).
If the table has casters, they must be lockable.
Description Weight Dimensions
Printer Crated 350 pounds (159 kg)
Width: 48 inches (122 cm)
Depth: 40 inches (102 cm)
Height: 42.75 inches (109 cm)
Printer Uncrated 295 pounds (134 kg)
Width: 34 inches (86 cm)
Depth: 28 inches (71 cm)
Height: 36 inches (92 cm)