User Guide


Site Preparation Guide Preparing For Installation
Page 10
5. Remove all tape and carefully unwrap the printer by pulling the plastic bag downward.
Caution:
Use care when cutting the plastic bag to avoid scratching the printer’s surfaces.
6. Using a utility knife, cut away and remov
e the plastic bag’s material ensuring that the bag is
not blocking the fork lift opening or the printer’s feet (
Figure 5).
7. Remove the protective film from the touchscre
en and the logos on the printer’s exterior.
8. Inspect the printer’s exterior for dents and scratches. Immediately report any damage to
Stra
tasys and the shipping company.
9. Using a forklift, carefully raise the printer
vertically and remove the shipping base.
Caution:
Access the fork lift opening beneath the printer, between the feet (
Figure 5).
Figure 5: Opening for Forks
20 inches [51cm] Max
Opening for forks
20 inches [51cm] Max
Opening for forks