User's Manual

Using Objet Studio
5–32 DOC08010 Rev. A (DRAFT 1)
Setting Model
Dimensions
Youȱcanȱchangeȱanȱobject’sȱdimensionsȱbyȱchangingȱitsȱsizeȱonȱtheȱXȬ,ȱYȬ,ȱ
andȱZȬaxes,ȱfromȱtheȱDimensionsȱgroupȱonȱtheȱModelȱSettingsȱribbon.
Figure 5-40: Dimensions on the Model Settings ribbon
• IfȱUniformȱScaleȱisȱenabled,ȱchangingȱtheȱobject’sȱdimensionȱonȱoneȱaxisȱ
affectsȱtheȱotherȱdimensions,ȱproportionately.
• Afterȱchangingȱaȱmeasurement,ȱpressȱEnterȱorȱclickȱinȱanotherȱfieldȱinȱ
theȱDimensionsȱgroup.
Note: You can change the height of the objects on the build tray only if this
is allowed by the Objet Studio settings (see “Positioning Objects on
the Z-Axis” on page 27).
Repositioning
Objects
Youȱcanȱmanuallyȱmoveȱandȱrotateȱanȱobjectȱonȱtheȱbuildȱtrayȱwithȱtheȱ
arrowȱkeys,ȱorȱbyȱdraggingȱitȱwithȱtheȱmouse.
To manually manipulate an object:
1. Selectȱanȱobjectȱbyȱclickingȱitȱonȱtheȱbuildȱtray,ȱorȱinȱtheȱmodelȱtreeȱ
pane.ȱ
2. ClickȱȱonȱtheȱModelȱToolbar,ȱorȱonȱtheȱModelȱSettingsȱribbon.
Aȱframeȱappearsȱaroundȱtheȱobject,ȱandȱtheȱcursorȱchangesȱtoȱindicateȱ
thatȱtheȱobjectȱcanȱbeȱmoved.
Figure 5-41: Manually moving an object