User's Manual
Table Of Contents
- About This Guide
- Safety
- Introducing the Alaris 3-D Printing System
- Installing Objet Software
- Using Objet Studio
- Using Job Manager
- Operating & Maintaining the Alaris30 3-D Printer
- Starting the Alaris30 Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Alaris Printer in Idle Mode
- Shutting Down the Alaris Printer
- Maintaining the Alaris Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning and Replacing the Roller Waste Collector
- Aligning the Print Heads
- Replacing Print Heads
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamp
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Backing-Up and Restoring Printer Settings
- ReInitiate Wizard
- Handling Printed Models
DOC-24000 Rev. A 3–5
Alaris30 User Guide
Shelf Life
Materialsusedforproducingmodelshavealimitedshelflife.Theexpiry
dateonthelabelisvalidwhenproperlystoredinanundamaged,
unopenedcartridge.Alwaysrotateyourstock,sothatthecartridgewith
theearliestdateisusedfirst.
Exposure to
Light
Ifprintingmaterialsarenotintheirsealedcartridges,makesuretoshield
themfromsunlightandothersourcesofUVradiation,suchasfluorescent
andmercury‐vaporlights.ExposuretoUVradiationcausesanincreasein
viscosityand,eventually,solidification.
Safety
Considerations
Beforebeingcured,resinsarehazardousmaterials.Topreventpossible
healthhazards,followtheseprecautionsregardingprintingmaterials:
• Donotexposetoflames,heatorsparks.
• Preventcontactwithskinandeyes.
• Ventilateareaswheretheyarehandled.
• Keepthemseparatefromfoodanddrink.
Curedplasticparts,however,aresafe.Theycanbehandledandstored
withoutprecautions.
Disposal
DisposeofcartridgesofObjetmodelandsupportmaterialinaccordance
withallapplicablelawsandregulations.Ifnecessary,thecartridgescanbe
disassembledforrecycling.
You can find more safety information about resins in “Safety Guidelines” on
page 2-4, and “First Aid for Working with Printing Materials” on page 2-6.
DRAFT 4 - July 11, 2010