User Guide

http://onsemi.com
8
Examples:
1. turn ON I_LED to 0.7A
{
"cmd": "set_pwm1",
"payload": {
"status": true,
"current": 0.7
}
}
2. turn OFF I_LED
{
"cmd": "set_pwm1",
"payload": {
"status": false,
"current": 0.7
}
}
Strata GUI:
- Available within Strata Development Studio
- Developed to make the DMS more stable, user friendly to control and operate within safety limits
- Operation restricted to “Safety Operation Area (SOA)” to reduce potential risk of damage or the DMS
malfunction. LED current levels below 0.7A are removed from operation area.
- Initial variables: LED current=0.7A; T_ON PWM FLASH time=0ms; NCV890204 output voltage=10.0V
- Cannot run simultaneously with the SCI