User Guide

http://onsemi.com
12
After the power supply is ON, connect the Mini USB cable to STR-DMS-CONTROL-GEVB and to computer
Once the system is fully powered, user can manipulate and test the performance of the system from Strata / Serial Console Interface
(SCI) together with DevWare. The interface is the same except PWM_flash Signal generated out of the Image Sensor over three pin
connector.
Important note: DevWare generates PWM flash signal directly from Image Sensor. Strata Control GUI / SCI serves only
for DCDC converter Voltage and I_LED current settings. Don’t use Flash PWM Signal.