Instruction Manual
4. Be alert that plasma cung sparks and hot materials from plasma cung can easily go through
small cracks and openings to adjacent areas.
5. Watch for fire, and keep a fire exnguisher nearby.
6. Be aware that plasma cung on a ceiling, floor, bulkhead, or paron can cause fire on the
hidden side.
7. Do not plasma cut on closed containers such as tanks or drums.
8. Connect the work lead/clamp to the job as close to the plasma cung area as praccal to
prevent plasm
a cung current from traveling long, possibly unknown paths and causing electric
shock and fire hazards.
1
3.4.8 Sparks & Hot Metal
WARNING! Chipping and grinding causes flying metal, and as welds cool they
can throw off slag.
1. Wear an AS/NZS approved face shield or safety goggles. Side shields are recommended.
2. Wear appropriate safety equipment to protect the skin and body.
34
www.strata.co.nz
ADVANCECUT 45