Instruction Manual
13.1 Store and Retain this Manual
Retain this manual for the safety warnings and precauons, assembly, operang, inspecon, maintenance
and cleaning procedures. Write the product’s serial number into the NOTES secon at the rear, and keep
this manual and the receipt in a safe and dry place for future reference.
1
3.2 Important Safety Information
Failure to follow the warnings and instrucons may result in electric shock, fire, serious injury and/ or death.
Save all warnings and instrucons for future reference.
This is the safety alert symbol to alert you to potenal personal injury hazards:
Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER! indicates a hazardous situaon which, if not avoided, will result in death or serious injury.
WARNING! indicates a
hazardous situaon which, if not avoided, could result in death or serious
injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situaon which, if not avoided,
could result in minor or moderate injury.
NOTE, used to address pracces not related to personal injury.
CAUTION, without the safety alert symbol, is used to address pracces not related to personal injury.
1
3.3 General Safety Warnings
1. Maintain labels and nameplates on the plasma cuer. These carry important informaon. If
unreadable or missing, contact Strata for a replacement.
2. Avoid unintenonal starng. Make sure the plasma cuer is setup correctly and you are
prepared to begin work before turning on the machine.
3. Unplug before performing maintenance. Always unplug the plasma cuer from its electrical
outlet before performing any inspecon, maintenance, or cleaning procedures.
4. Never leave the plasma cuer unaended while
plugged into power. Turn power off before
leaving the plasma cuer unaended.
28
www.strata.co.nz
ADVANCECUT 45