Instruction Manual

5
.4 Compressed Air Requirements
A reliable and consistent supply of clean, dry compressed air is essenal for proper operaon.
5
.4.1 Air Filtration
Although the machine contains its own internal air supply ltraon system it is recommended the
compressed air supply should have external filtraon in the line feeding the machine, both a
standard water trap (sintered bronze lter) and also a coalescing lter (for oil in air).
The air must be dry and free of oil and moisture (oen a symptom of older, worn out compressors).
5
.4.2 Air Compressor / Air Supply
The air requirement is a minimum of 120 l/min (4.5cfm) Free Air Delivery (FAD) at 75psi pressure.
This normally means the compressor must be a belt drive model
or if a direct drive it must have a
motor power of 2.5HP or greater.
5
.4.3 Air Hose & Fittings
The air hose must also be of sucient size (3/8”/ 10mm minimum) to supply the machine.
13
www.strata.co.nz
ADVANCECUT 45