Full Product Manual

NO CRACKS X-Crack
®
eliminates all cracks in vaulted ceilings, butterfly vaults, and inside 90-degree corners in
flat ceiling areas caused by truss uplifts. This patented product holds drywall joints stationary while allowing
structural movement of framing members.
STRAIGHTENS X-Crack’s rigid design, hinged backbone, and flexible tab design will straighten all uneven framing
members. This pre-straightening of sub-structure will eliminate the need of all pre-filling due to irregularities of
framing members. It makes easy work of intricate ceiling applications that have no backing.
FAST X-Crack is adjustable to any inside or outside angle and installs in minutes. X-Crack will reduce finishing
time by the elimination of pre-filling and pre-straightening. Your drywall finisher will start with a perfectly even and
straight joint.
PERMANENT Follow the installation instructions and you will solve the age-old problem of ceiling cracks and
uneven framing!
DESCRIPTION X-Crack is a patented, floating alignment joint member manufactured from 24 mil G90 galvanized
steel and is available at your local drywall distributor in ten feet length rolls. Each X-Crack carton contains ten 10’
rolls (100 lineal ft).
FEATURES
Flexible Tabs
Allow structural movement independent
from the drywall inside corner joint.
Straightens uneven roof framing members
during installation.
Pre-drilled for easy installation.
PVC Hinge
Adjusts to all inside and outside angles.
For inside corners, surface of PVC hinge
faces framing members.
For outside corners, surface of PVC hinge
faces out.
X-Crack
x-crack
26