Instructions / Assembly
I:\Marketing and Promotion\Product Information\Submittle Info Sheets\Outlet Patchinstruction_assembly.doc
New Concept Drywall Products
OUTLET PATCH
DESCRIPTION
(Speed,
Perfection and
Longevity)
Patented PVC fiber composite material patch that is 6 1/4” x 4 ¾”, .011” thick
comes in retail 2-pack case of 50 packs which weights 4.0. Outlet-Patch is also
packaged in bags of 20 and that come in cases of 5 bags that weigh 2.5 pounds. A
case of 500 bulk weights 12.5 pounds.
Outlet-Patch is a drywall patch used for repairs and reinforces miss-cuts or damage
area around a receptacle box. Pre-cut to fit standard receptacle box for easy use.
Outlet-Patch makes repairs strong, fast and easy. Same high-tech composite
material as Strait-Flex.
ADVANTAGES
Quickly repairs receptacle box damage or miss-cuts
PVC fiber composite material is strong and will not soften or sag
Material is pre-cut to fit standard receptacle box
Makes receptacle repair fast and easy.
Material is not affected by water and damp conditions
Outlet-Patch will not fuzz-up during sanding like competitive fiber glass-
metal patches
Waterproof, rustproof
WARRANTY
Strait-Flex products are backed by a lifetime warranty. When applied to a sound structure,
built on a permanent foundation using recommended application techniques, we warrant that
these products will not edge-crack for the lifetime of the structure. Contact Strait-Flex
International Inc for complete details.
DIRECTIONS
Prepare surface by cleaning and lightly sanding area around receptacle.
Apply ¼” of quick set or drywall compound directly to back of Outlet Patch.
Flip over patch and position Outlet Patch over center of receptacle box and
wipe down, removing excess compound between patch and drywall.
Immediately skim coat edges of patch and let dry. Compound that remains
on back side of Outlet Patch in damaged or mis-cut areas makes Outlet Patch
very rigid.
Apply second coat. Let dry and sand. Outlet Patch will not fuzz up during
sanding.
STORAGE
Store in dry place protected from moisture
Submittal Approvals:
Job Name:
Contractor:
Date: