user manual

RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 13
SAFETY PRECAUTIONS
vehicle, with greater horsepower and less mobility),
method and/or process be utilized to properly
complete the job with the degree of efficiency and
safety required. Contact the Customer Service
Department for specific information regarding
suitable job applications, job sites surface conditions
and operator experience/skill/common sense
recommendations for this Crack Saw BEFORE
utilization. There is no charge for this service.
MAINTENANCE, REPAIR AND STORAGE.
1) Use only genuine, approved replacement parts
and accessories for maintenance and repair. Use of
parts and accessories manufactured by others can
result in property damage and/or personal injury.
2) Follow the Service instructions as outlined in the
appropriate section of this manual.
3) Always stop the engine or electric motor and
disconnect the spark plug wire or power source
cable BEFORE checking or working on the Crack
Saw.
4) Always properly maintain the Crack Saw.
Frequently check all fasteners and individual parts.
Built in safety features are effective only if they are
maintained in good working condition. Replace any
questionable part or assembly with a genuine,
factory approved, replacement part. Do not forsake
proper maintenance for the price of a few
replacement parts. Proper maintenance does not
cost...it actually pays dividends. Do not attempt any
maintenance repair work not described in this
manual. Have such work performed at your dealer's
service facility.
5) A worn or damaged engine muffler is a fire hazard
and may cause loss of hearing. Check to see that
the muffler is in good condition. If the muffler is
equipped with a spark arresting device, determine
that it is in proper working condition at regular
service intervals. Replace the spark arresting device
with an approved replacement if there is any
question of it integrity. It is the responsibility of the
owner(s) and/or operator(s) to provide for and
properly maintain a USDA approved, spark arresting
muffler in an operating area specified by law. Check
with appropriate governing agencies for more
specific information. The Crack Saw must not be
operated if the muffler is faulty or has been
removed. Contact with a hot engine muffler can
cause property damage and/or personal injury.
6) Do not operate the Crack Saw without the use of
factory approved V-belt and diamond blade guards
that are maintained in proper structural condition.
Frequently inspect the guards for signs of wear,
cracks and other signs of fatigue. If there is any
question regarding the structural integrity and/or
condition of the belt guard, properly dispose and
replace with a genuine, factory approved,
replacement part only.
7) Maintain all safety and operation decals in proper
condition. If any decal becomes damaged and/or
unreadable, replace with a genuine, factory
approved, replacement part only.
8) The Crack Saw utilizes many self locking type
hexagon head nuts to minimize the effects of
vibration. Replace all self locking hardware with
genuine, factory approved, replacement parts only.
9) Consult the material supplied by the engine or
electric motor manufacturer for specific information
relative to proper operational, lubrication and
storage requirements.