Operating Instructions and Installation Instructions

CLEANING
12.200
GAS HOB
Burner caps and heads
• The slots in the burner head where
theamesburnshouldbeclearedof
deposits.
• Clean with a nylon brush, rinse and
then dry thoroughly. There may be
brown coloured markings on your
burners; these are carbon deposits or
fat stains and can be removed using
asoaplledpad.
• Do not put burners in the dishwasher
or soak them. Using dishwasher pow-
ders, washing up liquids and caustic
pastes can damage the burners.
• Burner caps and heads must be
repositioned correctly so that they
sit squarely on to the hob as shown.
This is particularly important with
stainless steel models as failure to re-
position the caps correctly may result
in discolouration of the stainless steel
around the burners.
Cast iron griddle or pan supports (if
tted)
• Ensure the griddle has fully cooled
and scrape off any stubborn marks
and bits of food with a plastic or
wooden cooking implement. Rinse in
warm soapy water and dry with a
tea towel.
• Do not clean in a dishwasher.
• If you notice any rusting on your
griddle, or pan-supports, simply clean
in warm soapy water, then re-season.
• Toseason:Heatthegriddlefor
30 seconds at a medium setting then
switch off. Use a minimum amount
of unsalted vegetable oil, on a dry
cloth or paper towel, and apply a thin
coat of oil to the element surface.
Wipe off the excess and re-heat the
griddle for one minute.
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head