Users Guide & Installation Handbook Stoves SEH600iTCX Part No 082753602 Date 19/03/2013
contents & INTRODUCTION CONTENTS • SAFETY • USING THE product • cleaning • INSTALLATION INSTRUCTIONS • technical data • CUSTOMER CARE INTRODUCTION Thank you for buying this Britishbuilt appliance from us. This guide book is designed to help you through each step of owning your new cooker, from installation to use. Please read it carefully before you start using your product, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can.
Safety Before Using the product Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. General WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continously supervised.
Safety during use, as this will seriously affect the safety and performance, particularly in relation to surface temperatures becoming hot and gas operated parts not working efficiently. The cooling fan (if fitted) is designed to run on after the control knob has been switched off. WARNING! Do not spray aerosols in the vicinity of this appliance while it is in operation. WARNING! - Do not store or use flammable liquids or items in the vicinity of this appliance. WARNING! Do not modify this appliance.
Safety NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a damp cloth. Danger of fire: do not store items on the cooking surface. If the surface is cracked, broken or shattered, switch off the appliance to avoid the possibility of electric shock and call for a service engineer’s visit. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
Safety only. It must not be used for other purposes, for example room heating. Induction Hob Parts of the appliance may become hot while in use. Always make sure that children are supervised when they are near to the appliance. Always position pans over the centre of the cook zone, and turn the handles to a safe position so they cannot be accidentally knocked or grabbed.
Safety Keep electrical leads from trailing over or going near the hob. The appliance must never be disconnected from the mains supply during use as this will seriously affect the safety and performance, particularly in relation to surface temperatures becoming hot and component parts not working efficiently. The cooling fan (if fitted) is designed to run on after the control has been switched off. oil can be dangerous and may result in a fire.
Safety Old Appliances on the product or on The Symbol its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the applicable collection point for the recycling of electrical and electronic equipment. You will by ensuring the appliance is correctly disposed of help prevent potential negative consequences for the environment and human health.
USING THE HOB - INDUCTION Touch Controls Feature Symbol Eco Power Power Slide Control Digital Display No.
USING THE HOB Touch Controls Selecting and activating a cook zone. The touch controls for your induction have been designed to provide you with finger tip control of your hob, providing accurate and repeatable power settings for cooking and an easy clean surface that can be easily wiped over. 1) Select the required cook zone. When a cook zone is activated the power setting is displayed for each zone individually.
USING THE HOB Special Hob Functions Pause key Central On/Off switch Warning! The central on/off switch enables all of the cooking zones to be switched off simultaneously at a touch of a button, so when you have finished cooking or are called away from the kitchen for any reason you can rest assured that everything is under control and safe.
USING THE HOB Auto Heat Up End of Auto Heat Period Helps to take the worry out of pans boiling over and burning food! No need to stand over the pan, allows you to do other tasks whilst maintaining control over the pan. Initially, while the cook zone is at the highest setting, “A” will flash alternately with your selected lower setting. Then, when the period of highest setting is over, “A” will stop flashing and the cook zone will automatically reduce the heat to your preset lower setting.
USING THE HOB Power Boost Minute Minder Rev up your hob with this feature, temporarily boost the power to a cook zone by a massive 60% The minute minder buzzes when the time set has expired. Does not switch off any zone. The power boost is a function that can be used to temporally boost the normal maximum power for a cook zone by borrowing the available power from a “paired zone”. To operate: All the cook zones have this function apart from the “Griddle Zone ” function.
USING THE HOB Timer auto switch off When the time is up The timer can be set to automatically turn off a cooking zone. 1) The corresponding indicator in the timer display will flash, the timer will beep, and the cook zone will automatically turn off, (The cook zone will display H if the surface is hot). All four cook zones can be simultaneously timed to turn off automatically. Cook zones can be set for a maximum time of 99 minutes.
USING THE HOB Griddle Zone with Bridge Function G r id d le Z o n e Flexibility is what counts. The LH zones can be used as two separate round cooking zones which can be controlled individually or they can be bridged to provide a large oval zone that can be controlled via one setting. Large pans and griddle plates can be placed across the two zones. To Operate: 1)Simultaneously select the LHF & LHR cook zones (“n” will appear in the LHR cook zone display).
USING THE HOB Pans and cookware for induction hobs. Pans and Cookware for induction cooking zones must be made of ferrous material such as cast iron and have magnetic properties. The base must also be of the correct diameter. It’s important that good quality flat bottomed pans are used. If a pan creates a large air gap over the middle of the cooking zone, the accuracy of the temperature sensing can be affected. Always ensure that pan bases are dry before using them on the hob.
USING THE HOB Child Lock “L” To de-activate the child lock: This feature is to help prevent accidental switching on of the hob, especially by young children. 1) Select the On/Off Key. (L will be displayed on all Cook Zones). To Activate: 1) Select the On/Off Key. 2) Simultaneously touch the RHF cook zone and the Power Boost keys, the hob should beep. 3) Remove fingers and touch the RHF cook zone again. (L should appear in all the cook zone displays). 4) Switch off the hob.
USING THE HOB Troubleshooting The hob produces a smell the first few times it is used. Heat a pan full of water on each zone for half an hour. Pans make a noise during cooking This is caused by vibration due to the passage of energy from the hob to the pan. On a high setting this is quite normal for certain types of saucepan. It will not damage the hob. The hob makes a slight clicking sound The fan keeps working for a few minutes after the hob has been turned off. This cools down the electronics.
CLEANING Electric Hob • You can restore the hotplates by using a solid plate cleaner but take care to avoid the red spots on elements. • To prime: Switch on each element in turn for a short while (with no pan on it) at a medium - high setting. This will harden and burn off the coating. • To season: Heat the element for 30 seconds at a medium setting then switch off. Use a minimum amount of unsalted vegetable oil, on a dry cloth or paper towel, and apply a thin coat of oil to the element surface.
installation General information Installation should only be carried out by a qualified installer or engineer. Please keep to the following points mostcarefully; Although every care has been taken to ensure this appliance has no burrs, or sharp edges, we recommend that you wear protective gloves when installing and moving this appliance. This will prevent injury. The hob should not be fitted above a washing machine, a fridge or a freezer.
installation Installation above an oven Refer to the manufacturer’s instructions for clearances above the oven. We recommend a 9mm gap between the bottom of the hob and appliance, should the work surface be less than 38mm deep. In the case of a pyrolytic oven If installing the hob above a pyrolytic oven, additional provision for air circulation / ventilation may be required.
installation Clearances and dimensions – requirements 1. No shelf or overhang of combustible material should be closer than 650mm above the hob. 2. There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clearance must be maintained up to 420mm above the worktop. 3. There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall. This clearance must be maintained up to 650mm above the worktop. 4.
installation Fitting into worktop Cut a hole in the work surface to the required size. See table for relevant dimensions. A clearance of at least 50mm should be maintained between the cutout and any rear or side wall. The worktop must be of heat-resistant material or covered with heat-resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell relatively quickly in contact with humidity.
installation Fixing Brackets Installation advice - cabinetry Dealing with sides, cross-rails and back-panels in cabinetry Depending on the cabinets, the worktop thickness and the hob positioning, it is possible for the hob base and/or the clamp brackets to interfere with parts of the cabinet. Cut away cabinetry and use appropriate fixing brackets for your installation. Important: Clamps may be reversed to fit either 30mm or 40mm deep work top.
installation Connect to the electricity supply (For Fixed Wiring only) Warning: This appliance must be earthed. The hob must be installed by a competent electrician, using a suitable double pole control unit, with 3mm minimum contact separation at all poles. We recommend that the appliance is connected by a competent person who is a member of a “Competent Person Scheme” who will comply with the required local regulations. Connection should be made with a suitable cable.
technical data MAX Total Power Rating @ 220 - 240V ~ 50Hz = 7.4kW Individual Cook Zone Power Ratings Cook Zone Normal Power Rating / Power Boost kW LHF 1.85/3,00 LHR 1.85/3.00 RHR 2.30/3.70 RHF 1.40/2.
CUSTOMER CARE Customer Care Web Shop Having purchased a superior cooker, hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manufacturer? We offer an extensive range of accessories, components and cleaning products which, will instantly give your cooker a good as new look. range of Bake ware and Cookware essentials including Roasting Pans, Cake Tins and Non-Stick Cooking Liners. For all enquires, please visit our Web Shop at www.gdhaonline.
CUSTOMER CARE To contact Stoves about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3740 in case of difficulty within the UK Alternatively general, spares and service information is available from our website at www.stoves.co.uk Please ensure that you have the product’s model no and serial no available when you call.
