Operation Manual
Setting the time of day
Touch&holdthecentre(function)iconfor
afewsecondsuntilthe●symbolbetween
thenumbersontheLEDdisplayashes.
Whilethe●symbolisashing,youcan
adjust the time of day by touching the 
plus&minusicons.Pleasenote:thehours
& minutes adjust quickly.
Important - once the time of day has 
been set, allow approximately 30 seconds 
before using any of the other programmer 
functions. This ensures that the time of 
day will remain correct.
Setting an alarm tone
Touch & hold the plus & minus icons 
simultaneouslyuntilthe●symbolashes
& you hear a beep - then touch the centre 
(function)icon.
Touch the minus icon to select the tone.
You can change the tone by repeatedly 
touching the minus icon - there are three 
tones to choose from.
Setting the minute minder
To set the minute minder, touch & hold the 
centre(function)iconuntilthebellsymbol
appears&beginstoash.Important-the
ashingwilllastforapproximatelyve
seconds, so any setting must be carried 
out within this time frame.
Touch the plus & minus icons to set the 
length of time required. Once this has 
been done, the minute minder is set.
When the desired length of time has 
counted down, the alarm will sound. To 
cancel the tone, touch & hold any of the 
icons.
To cancel the minute minder at any time, 
touch & hold the plus & minus icons 
together.
Semi-automatic cooking
Method 1 - duration (switch off after 
set time period):
Touch&holdthecentre(function)icon;
thebellwillash&youwillhearabeep.
Touchthecentre(function)iconagain
- this will skip past the minute minder 
function.
Thedisplaywillashtheword‘dur’&the
‘A’willashonthelefthandofthedisplay.
Use the plus & minus icons to set the 
length of time you want to cook for. The 
ashingwilllastforapproximatelyve
seconds, so the setting must be done 
within this time frame or the time of day 
will show again.
Once the duration has been set, the oven 
will automatically switch off. When the set 
time has elapsed the alarm will sound. To 
switch the alarm off, touch any icon.
To view any remaining time, touch & hold 
thecentre(function)icon&touchagain.
To cancel the semi-automatic programme 
at any time, touch the plus & minus icons 
together.
Method 2 - end time (switch off at a 
set end time):
Touch&holdthecentre(function)icon;
thebellwillash&youwillhearabeep.
Touchthecentre(function)iconagain
- twice - this will skip past the minute 
minder & duration functions.
Thedisplaywillashtheword‘End’&the
‘A’willashonthelefthandofthedisplay.
USING THE CLOCK/PROGRAMMER-ELEC(if fitted)










