Vogue Midi T Highline Ins…lation User Instructions
26
1. General
1.1 To make the installation of the appliance easier it is best
to remove the internal components before fitting into the
builders opening/studwork.
PACKING LIST
• User & Installer Instructions
• Warranty card
• Eco Label
• Pair leather gloves
• Rear Flue Collar
• Blanking Plate
• Flue Ring
• Operating Tool
• Thermic Seal
• Ash Pan Tool (Multi-Fuel Only)
• Smoke Control Plate (Multi-Fuel Only)
• Flue Heat Shield
• 2 x Spacer Tubes
• 2 x Self Tapping Screws
STANDARD FEATURES
• Primary air
• Airwash (for wood burning / clean glass)
• Adjustable Secondary air (to ensure complete burning of
uegases)-Factorysetfornominaloutput
• Toporrearueexitoption
1.2 For the best results removing the following components as
set out below.
2. Removal of the Log Guard
2.1 To remove the Log guard:
— Lift Log Guard clear of the supporting brackets.
— Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
1
Pre-Installation Instructions
3. Removal of the Baffle
No tools are required.
3.1 Tomaintainefcientcombustiontheapplianceisttedwitha
metalbafeplateatthetopoftherebox,seeDiagram2.
2
3.2 First remove the Log Guard from the appliance to give
accesstotherebox.
3.3 Thebaferestsontwosupportingpinswhicharettedwith
two removable supporting tubes.
Slide the tubes off the pins to provide additional
manoeuvrabilitytothebafe.
3
Pins
Tubes
Baffle
3.4 Oncethetubesareremoved,liftthebafeslightlysoitis
free from the supports.
—Movethebafeforwardsandlowerthroughtherebox.
— Remove through the door opening.
3.5 Reversetheaboveprocesstoreplacethebafe.
Do not modify the bafe.