Vogue Installation User Instructions

31
Dome
Catch
Point of
Dome
Appliance
Body
When the catch is in
the correct position the
locking mechanism can
slide over the Dome
and drop far enough to
secure the door
Locking
Mechanism
Correct Position
8
9
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch too
high will not allow the
locking mechanism to
drop far enough over the
Dome to secure the door
if the metal expands in
the heat
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too high
6.5 To ensure a firm hold by the locking mechanism, the catch
should be positioned to allow the maximum distance of travel
up and down over the tapered end of the catch.
Note: If the point of the Dome Catch is in line with the
bottom of the locking mechanism this will prevent the
door from being pushed closed, too high and the catch
won't travel far enough down the other side of the catch
to hold the door if the metal expands when hot.
6.6 Fully tighten the lock nuts to secure the Dome Catch.
6.7 Open and close the door several times to the check the
adjustment.
7. Final Checks
7.1 Following these adjustments check that the door:
— Does not come into contact with the log guard.
— Can be pushed shut without operating the door handle.
— Passes the paper sealing test.
— Aligns with the side and top of the appliance.
Maintenance & Servicing