Vogue Wall Mounting Kit Installation Instructions
9
3.10 If installing a top exit appliance, replace the Blanking Plate.
If installing a rear exit appliance, fit the rear flue adapter.
Fasten with the 4 washers and nuts previously removed.
24
To complete the fitting of the Back Panel the upper rear
firebricks must be removed. To do this:
3.11 Remove the baffle.
The bafe rests on 2 supporting pins which are tted with 2
removable supporting tubes.
Slide the tubes off the pins to provide additional
manoeuvrability to the bafe.
25
Pins
Tubes
Baffle
3.12 Once the tubes are removed, lift the bafe slightly so it is
free from the supports.
— Move the bafe forwards and lower through the rebox.
— Remove through the door opening.
Installation Instructions
3.13 Remove the upper rear Firebricks, see Diagram 26.
26
*Woodburning Brick set shown
3.14 With the bricks removed, using the Back Bracket as a
template drill 2 x Ø8.5mm holes in the designated spots, see
Diagram 27.
27
3.15 Secure the Back Bracket through the holes with the
provided M8 washers, nuts, and bolts, see Diagram 28.
28