Vogue Wall Mounting Kit Installation Instructions

5
2a.4 Secure the appliance to the plinth using the 2 M8 screws
and washers previously removed, see Diagram 5.
5
2a.5 Place the 2 x M6x120 studs in the holes previously occupied
by the levelling feet. Loosely fix 2 of the washers and nuts
provided to each stud, see Diagram 6.
6
Nut
Washer
Stud
2a.6 Fasten the studs with the remaining nuts and washers and
tighten, see Diagram 7.
7
Nut
Washer
Nut
2a.7 Locate the Cast Panel to the 2 fixing slots to fit the Plinth
Front, see Diagram 8.
NOTE: It may be necessary to open the appliance door to
avoid damage.
8
The Standard Plinth installation is complete.
To fix the appliance to the wall, see Section 3.
2b. Midline Plinth
2b.1 Remove the 4 screws on the back of the cast panel.
Lift the plinth front clear of the 2 locating slots to remove,
see Diagram 9.
9
2b.2 Remove the M8 screw and washers from the back of the
plinth, see Diagram 10.
10
Installation Instructions