Vogue Wall Mounting Kit Installation Instructions

4
1. Pre-Installation
Each installation is unique to the property so it is not possible
to give details to suit every setting. The installation must comply
with Building Regulations
†
and be made using "best practice"
construction methods
‡
.
† England and Wales – Document J / Scotland -
Part F/Document J (Republic of Ireland only)
‡ the latest edition of BS 8303, BS EN 15287,
BS 7566
1.1 Take care when installing the appliance. Careless
handling and use of tools can damage the finish and/or
area.
NOTE: If a plinth is to be tted, this must be done
BEFORE tting the back bracket to the appliance,
see Section 2.
1.2 Select and fit the required flue option, see PM1295 /
PM1296, Installation Instructions, Section 3.
WARNING:
This appliance can weigh up to 100kg + Fuel.
The manufacturer has designed this appliance to
attach to a masonry wall and all xings supplied
reect this. The Fixing points must be located over
brick and not into mortar. Use appropriate xings.
If the appliance is NOT being tted with a Decorative
Plinth, proceed to Section 3.
2. Fitting a Decorative Plinth
The appliance can be fitted with optional decorative plinths.
Appliance
Vogue
Standard Plinth Midline Plinth
Midi T VG-MID-BP VG-MID-BML-E
Appliance
Vision
Standard Plinth
Midi T RVN-MIDPG-E
The installation method is different between plinth types.
2.1 Remove the levelling feet from the front of appliance base,
see Diagram 1.
1
*Underside of appliance
Installation Instructions
2a. Standard Plinth
2a.1 Lift the plinth front clear of the 2 locating slots to remove,
see Diagram 2.
2
2a.2 Remove the M8 screw and washer from the back of the
plinth, see Diagram 3.
3
2a.3 Position the appliance on the plinth.
Ensure the 2 side plinth braces locate into the 4 plinth
spacers on the inside of the appliance, see Diagram 4.
4