Vogue Wall Mounting Kit Installation Instructions

General Information

1. General

The Wall Mounting Kit should be fitted and installed in

accordance with these instructions.

1.1 These instructions are supplementary to, and must be read in

conjunction with the instructions supplied with the appliance.

Read both thoroughly before installation.

Packing List

1 x Wall Bracket

1 x Back Bracket

5 x Masonry Bolts

2 x M8 Flange Nuts

2 x M8 Penny Washers

2 x M8x18 Hex Head Bolts

8 x M6x18 Hex Head Bolts

2 x M6x18 Washers

2 x Plinth Brackets

2 x M6x120 Studs

6 x M6 Nuts

6 x M6 Washers

2. Clearances

2.1 When installing a Wall Mounting Kit it is important to observe the following clearances to both combustible and non-combustible

materials.

Also ensure that a clearance of 1 meter is maintained in front of the appliance when operating.

IMPORTANT: INSTALLATION MUST COMPLY WITH CURRENT BUILDING REGULATIONS.

ENSURE THAT SUFFICIENT CLEARANCES ARE PROVIDED BETWEEN THE FLUE PIPE AND ANY COMBUSTIBLE

MATERIALS IN THE FIREPLACE IN ACCORDANCE WITH THE RULES IN FORCE.

†

Wall Bracket

Masonry Bolts

M8x18 Bolts

M8 Washer

Back Bracket

M8 Flange Nut

M6 Nut

M6 Washer

Plinth Bracket

M6x120 Stud

M6x18 Bolts

M6x18 Washer

† England and Wales – Document J / Scotland -

Part F/Document J (Republic of Ireland only)