Vogue Midi T Highline Installation and User Instructions

26
1. General
1.1 To make the installation of the appliance easier it is best
to remove the internal components before fitting into the
builders opening/studwork.
PACKING LIST
• User & Installer Instructions
• Warranty card
• Eco Label
• Pair leather gloves
• Rear Flue Collar
• Blanking Plate
• Flue Ring
• Operating Tool
• Thermic Seal
• Ash Pan Tool (Multi-Fuel Only)
• Smoke Control Plate (Multi-Fuel Only)
• Flue Heat Shield
• 2 x Spacer Tubes
• 2 x Self Tapping Screws
STANDARD FEATURES
• Primary air
• Airwash (for wood burning / clean glass)
• Adjustable Secondary air (to ensure complete burning of
 uegases)-Factorysetfornominaloutput
 • Toporrearueexitoption
1.2 For the best results removing the following components as
set out below.
2. Removal of the Log Guard
2.1 To remove the Log guard:
— Lift Log Guard clear of the supporting brackets.
— Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
1
Pre-Installation Instructions
3. Removal of the Baffle
No tools are required.
3.1 Tomaintainefcientcombustiontheapplianceisttedwitha
metalbafeplateatthetopoftherebox,seeDiagram2.
2
3.2 First remove the Log Guard from the appliance to give
accesstotherebox.
3.3 Thebaferestsontwosupportingpinswhicharettedwith
two removable supporting tubes.
Slide the tubes off the pins to provide additional
manoeuvrabilitytothebafe.
3
Pins
Tubes
Baffle
3.4 Oncethetubesareremoved,liftthebafeslightlysoitis
free from the supports.
 —Movethebafeforwardsandlowerthroughtherebox.
— Remove through the door opening.
3.5 Reversetheaboveprocesstoreplacethebafe.
Do not modify the bafe.