Vogue Installation User Instructions

Pre-Installation Instructions

1. General

1.1 To make the installation of the appliance easier it is best

to remove the internal components before fitting into the

builders opening/studwork.

PACKING LIST

• User & Installer Instructions

• Warranty card

• Pair leather gloves

• Operating Tool

• Thermic Seal

STANDARD FEATURES

• Primary air

• Airwash (for wood burning / clean glass).

• Factory set Secondary air (to ensure complete burning of

flue gases)

• Top or rear flue exit option

1.2 For the best results removing the following components as

set out below.

2. Removal of the Log Guard

2.1 To remove the Log guard:

— Lift Log Guard clear of the supporting brackets.

— Rotate to clear the sides of the door opening.

Do not use appliance without the log guard in position.

3. Removal of the Baffles

No tools are required.

3.1 To maintain efficient combustion the appliance is fitted with a

twin baffle system, consisting of an upper and lower baffle.

3.2 First remove the Log Guard from the appliance to give

access to the firebox.

Upper Baffle

Lower Baffle

3.3 Remove the Lower Baffle, see Diagram 3, by lifting the

front edge slots from the support bars on the appliance

sides.

Support

Bar

Lower Baffle

slots

Lower

Baffle

Baffle Rear

Edge location

Lower Baffle

— Pull the baffle forward to disengage the rear edge from

the location above the secondary air holes.