Studio Freestanding Installation User Instructions

Installation Instructions

6.2 Place the glass plates feet down on top of the appliance.

Ensure the glass tops are flush with the front and sides of

the appliance and placed correctly around the flue pipe.

Ensure top plates

are aligned

correctly with the

edge of product

and flue pipe

7. Optional Decorative Flue Cover

This appliance can be supplied with an optional decorative

flue cover. Please refer to the instructions supplied with the

flue cover for installation guidance (PM504).

8. Optional Bench Plinths

This appliance can be installed on an optional bench,

available in two heights and a variety of widths. Please refer

to the instructions supplied with the bench for installation

guidance (PM205). If installing a bench the appliance

must be secured to the bench and the bench must be

fixed to the hearth.

9. CO Alarms

All open flued appliances can be affected by temporary

atmospheric conditions which may allow fumes to enter

the house. Building regulations require that whenever

a new or replacement fixed solid fuel or wood/biomass

appliance is installed in a dwelling a carbon monoxide

alarm must be fitted in the same room as the appliance.

Further guidance on the installation of the carbon

monoxide alarm is available in the latest edition of

BS EN50292 and from the alarm manufacturer's

instructions.

HETAS recommend the unit is permanently fixed

in accordance with the manufacturer's installation

instructions or with the guidance contained in Approved

Document J where no other information is available.

Provision of an alarm must not be considered a

substitute for either installing the appliance correctly

or ensuring regular servicing and maintenance of the

appliance and chimney system.