Studio Freestanding Installation User Instructions

21
5. Separate the Inner & Outer Box
To protect the delicate parts of the appliance the product
has been designed so that the inner box can be removed
from the outer box.
Keep the inner box in a safe place whilst the outer box
is installed into the fabric of the house, the main flue
connections made and the walls finished.
When all the heavy work is complete the inner box can be
re-installed into the outer box and the final connection made.
5.1 The internal components, bricks, baffles and the door etc
should be removed to make the installation process easier
and prevent damage.
5.2 First remove the inner collar, see Diagram 8.
Inner Collar
4 Bolts
8
5.3 First remove the inner collar. Using a 13 A/F spanner,
remove the 4 x bolts, see Diagram 9.
Recessed into
Inner Collar
Long bolts - front
Short bolts - rear
9
5.4 The inner box can now be slid out of the outer box.
There is a roller assembly at the rear which locates in
cutouts on the outer box, see Diagram 10.
10
Pull the inner box carefully forward to release from the
cutouts. It should now slide smoothly out of the outer
box.
This will require at least two people.
Pre-Installation Instructions