Studio Freestanding Installation User Instructions

11
15. Seasonal Use
15.1 Clean and service the appliance if not used during the
warmer months, as detailed in the Maintenance and
Servicing section.
15.2 Set the air controls to 50% to keep the appliance ventilated
and stop the build-up of any moisture inside.
15.3 Before re-lighting the appliance:
—Remove the baffles.
—Clear any debris that may have accumulated.
—Check the flue is clear of any blockages.
16. Optional Extras
Decorative Flue Cover
16.1 This appliance can be fitted with an optional decorative
flue cover. For installation procedures please refer to the
instructions supplied with the kit.
Outside Air Kit
16.2 This appliance can be fitted with an optional kit to help
bring air directly into the appliance from outside. The For
installation and operating procedures you must refer to the
instructions supplied with the Outside Air kit.
Bench
16.3 This appliance can be fitted with a bench, various sizes
are available. This must be done at the time of installation.
Please refer to instructions.
Heat Shield
16.4 This appliance can be fitted with a heat shield in order to
decrease the distance the appliance can be installed from
a wall. This must be done at the time of installation. Please
refer to instructions.
Glass Top Plate
16.5 This appliance can be fitted with a decorative glass top
plate. This must be done at the time of installation. See
installation instructions, Section 6.
Care & Maintenance