Installation & Assembly

WWW.STOUTTEXTILES.COM
STOUT TEXTILES
3050 TREWIGTOWN RD, COLMAR PA 18915
1.800.523.2592 | [e-mail]
Wallpaper Preparation
1. The wall surface should be clean, dry, smooth and free from mildew.
2. At the paperhanger’s discretion, the wall surface should be primed with a wallcovering primer.
Hanging Instructions
1. The wallcoverings are inspected and tested – however, they should be checked for defects
before hanging. We will replace defective merchandise through your dealer but assume no
responsibility for labor charges for the application or removal of any wallcovering. The hanging
of more than 3 strips constitutes acceptance of the product. On plains and textures, we
recommend reverse hanging the strips.
2. Apply a lightweight pre-mixed vinyl adhesive to the wallcovering, carefully follow the paste
manufacturer’s instructions. Please ensure enough paste is applied to the edges of the
wallcovering.
3. Pull the strip slowly and fold glue on glue by taking both ends to the middle of the strip
(booking). Let sit for 3-5 minutes.
4. For non-matched patterns, reverse hang alternate strips. After 3 strips are hung, stand back and
inspect. If the effect is not desirable, re-hang strip #2 without reversing.
5. IMPORTANT: Wash adhesive complete;y from the surface of the wallcovering immediately after
hanging each strip. Any adhesive left on the wallcovering can attack the surface printed inks and
cause them to flake.