User's Manual

ManualsBrandsStormblue ManualsElectronicsUniversal Smart Drive

Universal Smart Drive ( U S D)

1. Introduction

Incredibly easy to transfer and store data from Pc to Pc, Pc to Mac, Mac to Mac and Mac to PC.

Universal Smart Drive is a small and simple plug-n-play mobile flash memory device on the Windows and Mac OS

which utilizes a standard USB port.

- operates as a removable hard drive on your computer.

- does not require software drivers*. (for Windows 98, driver installation required)

- allows for the data to be easily transferred across different OS platforms (ie. PC to Mac and vice versa) just

by plugging USD into the USB port on your computer.

- contains various memory capacities ranging from 16MB to 1GB.

- has 2 color illumination (red and green) easily to find device status.

2. Features

l No driver (installation software) required* (for Windows 98, driver installation required)

l Hot Plug and Play via USB port on PC and Mac.

l Cross platforms between PC and Mac and vice versa.

l Supports USB 1.1

l Supports OS : Windows98/SE, Windows ME. Windows 2000, Windows XP, Mac 8.6 or higher

l Capacities: 16MB/32MB/64MB/96MB/128MB/256MB/512MB/1GB

l Compact, Light Weight and Durable.

l 2 color illumination to indicate data transferring status

Green : Device connected, Red : Data transferring

l 10-years of data retention.

l Accessories : Extension cable (1M), neck strap, Windows 98 installation CD, user manual and warranty card.

* Installation program is required for Windows 98/SE. This program is supplied with the USD

or can be downloaded from our website (www.universalsmartdrive.net).

3 . System Requirements

IBM PC/AT or compatible Desktop / Notebook / Sub-Notebook / Laptop computers / Mac

(Pentium @ 100MHz or better) with USB ports.

Summary of content (6 pages)

PAGE 1
Universal Smart Drive ( U S D) 1. Introduction Incredibly easy to transfer and store data from Pc to Pc, Pc to Mac, Mac to Mac and Mac to PC. Universal Smart Drive is a small and simple plug-n-play mobile flash memory device on the Windows and Mac OS which utilizes a standard USB port. - operates as a removable hard drive on your computer. - does not require software drivers*. (for Windows 98, driver installation required) - allows for the data to be easily transferred across different OS platforms (ie.
PAGE 2
4. Driver Installation for Windows 98 Windows 98 SE 4.1 Before installation of the drivers, check first that the USB controller of your computer is working well. Open the “ control panel” → “ System Properties” → ” Device manager” , then check if it shows “ Universal Serial Bus controllers” and see if they are in good working condition. If your computer does not have USB controller, then the USB device will not work. 4.
PAGE 3
4.4 Dialog box shows where to locate the USD drivers. Select item “ CD-ROM drive” . Press “ Next” button. 4.5 Dialog box shows that Windows has located the USD driver in drive ‘ D’ . And press “ Next” button. SB Mass storage Device D:\USB_MSD.INF 4.6 Dialog box shows that Windows has finished the installation of the USD driver. Press “ Finish” button.
PAGE 4
5. How to use ? The USD functions as a removable disk drive on your computer. When you insert the USD to the USB port of your PC or Mac, then the “ removable disk” icon will appear in the “ My Computer Folder” . You can use the USD the same way as a Floppy disk or a Hard drive on your computer. When you pull out the USD from the USB port, the above icon will disappear. You can find if the USD controller is installed properly by clicking onto “ Control Panel” - “ System Properties” - “ device manager” . 6.
PAGE 5
7. Specifications Supported OS Windows 98/SE, Windows ME, Windows 2000, Windows XP and Mac 8.6 or higher Power Supply USB Bus-powered (4.5V to 5.
PAGE 6
FCC NOTICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.