Use and Care Manual
Table Of Contents
- Slide 1: ASSEMBLY & INSTALLATION INSTRUCTIONS
- Slide 2: Before getting started, let’s make sure this Storm Shell will work for you!
- Slide 3: Before getting started, let’s make sure this Storm Shell will work for you!
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
2A-15
TV Bracket –
This way up
24
2A-14 Mount Storm Shell Back
G6 or J6 Lag Bolts must penetrate wood studs at least 1.5 inches deep.
If wall material (siding, stucco, brick veneer) is too think to allow this,
longer lag bolts will be required. 8mm, 1/4”, or 5/16” diameter lag
bolts are adequate.
Note!
13mm
G6
x 4
or
J6
x 4
H6
x 4
TV Bracket