Use and Care Manual

3. Attach the two (2) Angle Brackets using four (4) S3 bolts for each bracket and four (4) N2 Flange
Nuts as shown in Figure 4. Note: The bolt head is placed on the outside of the Storm Shell Back
and the flange nuts are secured on the inside.
Figure 4
4. Assemble the four Buckle Latches onto the Storm Shell Back using the S7 screws (Figure 5).
Figure 5
Bolts:
S3-M4x14 Screw: 8pcs
N2- M4 Flange Nut : 8pcs
Screws:
S7- ST3.5x20 screw: 12pcs