Installation Guide
Table Of Contents
- Slide 1: ASSEMBLY & INSTALLATION INSTRUCTIONS
- Slide 2: Before getting started, let’s make sure this Storm Shell will work for you!
- Slide 3: Before getting started, let’s make sure this Storm Shell will work for you!
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
• Concrete wall or hollow wall (not drywall) installation? – No
• Wood Stud installation with stud spacing different than 16 inch? – Yes
• Wood Stud installation with stud spacing = 16 inch? – Maybe…
• The mounting holes must be placed over studs. If the Storm Shell
placement is OK, then No Adapter Mounting Plate is required.
• If you desire a different placement of the Storm Shell (left or right
of the studs), an Adapter Mounting Plate is required.
Do you need an Adapter Mounting Plate? (Not Included)
6
No Adapter Mounting Plate
required.
Yes - Adapter Mounting
Plate is required.
To order the Adapter Mounting Plate, please visit
www.StormshellTV.com/Accessories
Mounting Holes Align
with Studs
Mounting Holes Do
Not Align with Studs