Use and Care Manual

7. Install the Storm Shell Front and check that cover and latches fit correctly. Figure 9.
Figure9
B) ConcreteorBrickInstallation
When installing the Storm Shell Hard Cover and TV Bracket on a concrete or brick wall, the S7 and S8
screws alone will not be sufficient. Do not attempt to use the supplied S7 and S8 screws alone on
masonry or concrete.
Several options are commercially available for concrete or brick anchors. Options include concrete
sleeve anchors or concrete screws. Consult your local hardware store or online resources to
determine the best solution for your specific wall material. Obtain proper anchors and screws to
replace the S7 and S8 screws.
The installation procedure for concrete or brick is the same as for wood stud installation with the
following exceptions:
 Locating three wood studs is not required. Determine the desired location for the Storm
Shell Hard Cover and proceed at Step 2, using the selected concrete anchors.
InstalltheTVDisplay

Caution:ThisTVbracketcanbeusedforaTVupto44".ThemaximumweightoftheTVdisplay
shouldbelessthan110lbs.(50kg.). 
The installation kit includes screws of various diameters to ensure optimal installation.
Figure 10 shows the parts of the TV Bracket.