Use and Care Manual

5. Hang the Storm Shell Back on the wall. Use a 13 mm socket and wrench to attach the TV Bracket
using the S8 screws and the W3 washers (note the washers are placed between the S8 screw head
and the TV Bracket mounting hole). See Figure 7.
Figure7
6. Secure the Storm Shell Back to the wall by installing two (2) S7 screws and two (2) W4 washers in
the lower mounting holes (Figure 8). Tighten the S7 screws in the upper left and right keyholes.
Figure8
Screws:
S8- ST8.0X60: 3 pcs
W3- D8 Washer: 3 pcs
Screw:
S7- ST3.5X20: 2pcs
W4-D6 washer: 2pcs