Use and Care Manual


17. Connect the Extension Bars (B2) to the Hook Plate in the horizontal position using the S1 and
S2 screws. Place the Hook Plate on top of the Vertical VESA Mounting Plates so that the TV
Center Height Mark and the Hook Plate Center Height mark align. Hold an N1 nut under the
edge of the Vertical VESA Mounting Plate and place an S9 screw and W5 washer through the
Extension Bar hole; tighten the S9 screw with a screw driver. See Figure 19 and 20.
Figure19
Figure20
18. Follow Step 10 to secure the TV Display to the TV Bracket.