Use and Care Manual

Figure17
14. Follow Step 10 to secure the TV Display to the TV Bracket.
For VESA hole patterns 200 mm wide, follow steps 15 – 18.
15. Measure the TV height and determine the center height position. Place a mark or piece of
tape at the center height position. Measure the height of the Hook Plate and place a mark
or piece of tape at the center height position of the Hook Plate. When the Hook Plate is
attached to the TV, the two center marks should match.
16. Fix the Vertical VESA Mounting Plates to the back of the TV Display by connecting the proper
screw (S3/S4/S5) into the VESA holes. Select the proper washer (W1/W2/W3) to be used
with the screws. The Vertical VESA Mounting Plates should be mounted in a position where
the Hook Plate can be attached and centered to the TV. Figure 18.
Vertical VESA
Mounting Plates
Center Height
Position
VESA Hole
Pattern
Figure18