Use and Care Manual
Figure10
1. Place the TV display screen down on a soft, flat surface. Locate the four (4) threaded mounting
points that are located on the back of the display (called the VESA mounting holes).
2. Determine which screw (S3/S4/S5) is the proper size for the VESA mounting holes.
3. If the TV display has a curved back, or recessed VESA holes, the W2 Thick Washer can be used as
needed.
4. Determine the VESA mounting hole pattern dimensions. Typical dimensions are 100 mm x 100
mm (3 15/16” x 3 15/16”), 200 mm x 200 mm (7 7/8” x 7 7/8”), 100 mm x 200 mm (3 15/16” x 7
7/8”), 100 mm x 300 mm (3 15/16” x 11 13 16
⁄
”).
5. Determine if the VESA hole pattern is centered vertically (from top to bottom) on the TV. Many
TVs have a VESA pattern that is not centered vertically. If the VESA hole pattern is not centered
vertically, the Vertical VESA Mounting Plates must be used to mount the Hook Plate so that it is
centered vertically.
Hook plate
Swing arm
B2: Extension bar