Use and Care Manual

Determine the wall material and wall supports. Wall supports are typically
wood or metal studs, concrete, structural brick or masonry. Wall material
(cladding) is typically drywall, siding (vinyl or aluminum), stucco, brick veneer.
Step 2 – Attach Storm Shell Back to Wall
10
2A-1 Locate and Mark Wood Studs
• For wood stud installation, follow STEP 2A
• For solid concrete installation, follow STEP 2B
• For hollow wall installation (metal studs, concrete block), follow STEP 2C
CAUTION!
The Storm Shell TV Wall Mount must be secured into concrete,
structural brick or masonry, wood or metal studs. Do not mount
directly into drywall or plywood.
Step 2A – Wood Stud Installation
CAUTION!
Two people required for installation
If the wall material is
outdoor siding (vinyl or
aluminum), stucco, or brick
veneer; the wood studs may be
difficult to locate with a stud finder
due to several layers of
construction cladding. You may
need to locate the wood stud from
the inside wall and use
measurements to locate the wood
stud from the outdoor wall.
NOTE!