User Manual

8. System Recovery Utilities
From the
System Installation and Maintenance Main Menu, select System Recovery Utilities to display the
following options:
Configure Remote Install Manager
If you configured RIM at the time you created the boot media, it will be automatically enabled and it will not be
necessary to configure in this option. If, however you did not pre-configure RIM, or if you need to change the
RIM configuration (network adapter, IP address or subnet, or if you forgot the password you previously
assigned), you can configure and enable RIM from within the system Installation menus after booting from the
SBAdmin boot media. To do so, select the System Recovery Utilities option from the main menu to display the
following:
Select Configure Remote Install Manager. The following screen will display:
Storix System Backup Administrator 59 Version 8.2 Solaris System Recovery Guide