User Manual

You must define at least one stripe for a RAID 0 device. To do so, move to the # of Stripes field and
press F4. This will produce a list of stripes and/or an option to add a new stripe:
After making a selection from the list, an additional window will appear, allowing you to change the
settings for the selected stripe:
From this window, you must select the device or devices (stripes or other meta-devices) that make up
this stripe. To do so, move to the Device list field and press F4 to select or de-select from a list of
existing devices. To delete the stripe, move to the Create option field and press “D”. When finished,
press F3 or ESC to return to the
RAID Device Settings.
Hot Spare Pool: You can press F4 in this field to list and select an available hot spare pool. This pool
is a separate SVM device which must already exist, and may be created using the
Hot Spare Pools
option described below. Note that hot spare pools are only applicable to RAID 0 devices that are
assigned to mirrored (RAID 1) devices.
When all selections are complete, Press F3 or ESC to return the
SVM Settings Menu.
• RAID 1 (mirrored) : When selecting a RAID 1 device, or changing the RAID type of a previous device,
the following options will appear:
Storix System Backup Administrator 44 Version 8.2 Solaris System Recovery Guide