Owner manual

8. System Recovery Utilities
From the
System Installation and MaintenanceMain Menu, select System Recovery Utilities to display the
following options:
Load Additional Device Adapter Modules
This option is used to load SCSI, Fibre-channel or Network adapter modules that were not automatically loaded
when the system was booted from the media. While most necessary modules will be detected and automatically
loaded, if you are installing onto a different system with different adapters, it may be necessary to load
additional modules before all devices are detected.
For SCSI and Fibre-channel storage adapters, select Load Additional SCSI/FC Adapter Modules. For
networks, select Load Additional Network Adapter Modules. As with the following (Network) example, a list
of available modules and their descriptions will appear:
Storix System Backup Administrator 72 Version 8.2 Linux System Recovery Guide