Quick Start Guide

Charging weZee Disk
Enable / Disable
Connect the power adapter with supplied USB cable to weZee
Disk already off.
The battery level indicator will blink every 2 seconds during
charging and turn off when fully charged.
Transfer files
Connect weZee Disk (off) to any available USB port on your
computer using the supplied USB cable. It just works simply and
the disk volume will appear like any other external hard disk
drive. You can now begin to transfer data to and from weZee
Disk.
Note: The internal hard disk must be formatted by using one of
the following file system: NTFS or FAT32.
To turn on the weZee Disk, press the power button 3 seconds
which is located on the front panel.
The weZee Disk will start to initialize. The Power (green) LED
will flash followed by the Wi -Fi LED (blue). Once the initializa-
tion process is complete, the hard drive, WiFi and power LED
will remain light up.
To turn off the weZee Disk, press the power button 3 seconds
and all LEDs will turn off immediately.