Quick Start Guide

Introduction of weZee Disk
Battery Level LED
Read / Write LED
WIFI LED
WAN LED
RJ45 WAN Port
Reset Button
USB 3.0 Port
Power Button
USB 3.0 Port
Battery Level LED: battery level LED is:
Read / Write LED: The read / write LED is:
Wi- Fi LED:The Wi-Fi LED is:
WAN LED: The WAN LED is:
RJ45 WAN Port: To connect weZee Disk to the Internet via a Router / Switch.
Pour connecter le weZee Disk à Internet via un Routeur/Switch
USB 3.0 Port: Enables ultrafast data transfer and charging of the internal battery
when connected to the power adapter.
Power Button: Press for 3 seconds to turn on / off the device.
USB Host Port: Fashion Power Bank to charge any device by using an USB port
(weZee Disk off), Maximum power = 5V/1A
Reset Button: To restore factory settings, press this button for 5 seconds when the
weZee Disk is on.
a) OFF when:
- The power is off.
- The battery is fully charged (weZee Disk connected to a power adapter and in
off mode).
b) Green indicates that the battery level is good.
c) Green blinks slowly (2s) indicates that the battery is charging.
d) Green blinks rapidly (0.5 s) indicates that the device is in the process of stop.
e) Red flashes slowly indicates the battery level is of less than 30%.
f) Red flashes quickly indicates that the battery is empty and the unit will stop
within 6 seconds.
a) White when the device is connected via USB 2.0 mode.
b) Blue when the device is connected via USB 3.0 mode.
c) Blinks when data transfer.
a) Blue flashes when the unit is being initialized.
b) Blue and stable when the WiFi is ready for use.
a) Green when the Internet connection is ready for use.
b) Off when no Internet connection is found.