Quick Start Guide

TwinBox 230 Page 21/24
GENERAL
- Do not shake the TwinBox 230 as this may lead to damage to the device;
- Use only parts and accessories (power supply etc ...) recommended by the manufacturer;
- Do not move the device when in operation.
SAFETY
- To prevent fire or electric shock, do not put the device in the vicinity of any objects
containing liquids,
- If a heavy object or any liquid is dropped onto the device, immediately unplug it and have it
checked by qualified personnel before re-use.
- When in operation, the casing may become warm; therefore place the device on a flat and
rigid surface and avoid covering it or placing any object on top of it.
PRODUCT’S POWER SUPPLY
- When the device is not in use for a long time or in the case of a thunder storm, unplug the
device from the electrical power supply without pulling the power cable.
- The included power adapter is specific to the product. Using a different adapter may cause
damage to the device.
PLACING THE PRODUCT
- Install the device away from any equipment with strong electrical or magnetic currents such
as microwave ovens, large speakers, etc...
- Place your device in a well ventilated area and on a hard and flat surface in order to
disperse heat from the device.
CLEANING
- Never open the product in order to clean it as any attempt to open the device will invalidate
the warranty.
- Unplug the device from the power supply before cleaning.
- Clean the outside of the device and the remote control using a soft, dry cloth. Never use an
abrasive pad, scouring powder or solvents.