Operation Manual
6-15
Chapter 6: Conguration
Event SetupEvent Setup
Sensitivity Level
Region Number
Figure 6-20. Motion detection
If you want to remove a set region, please select the region number and click [Delete] to delete it.
Note:
If you want to record video onto SD card whenever motion in the scene
is detected, you need to set at least a motion detection region before
setting up event-based recording in Recording Setup.
I/O Status
Here displays the status of your I/O port for your reference.
Audio Detection
Congure the sensitivity level in audio detection used by event trigger. Available options: low, medium, high.