Operation Manual
6-12
Storex DNR-30H Network Camera
Event SetupEvent Setup
2. Once the event servers are congured, you can then go to the trigger setup to congure the type of
event, motion, schedule and the associated even actions.
3. In the motion detection page, you can set up the region and the sensitivity for detection.
4. If you want to use the I/O input, please connect the I/O devices before event setup.
Event Server Setup
Here provides the configurations of 6 different event servers including E-mail, FTP, Image or NVR Station
Notify, HTTP, and SMS. Please click on the event server you want to configure and input necessary
information.
Email Server
This supports standard SMTP on SSL-protected webmail platforms such as Hotmail (Windows Live) and
Google Mail (Gmail). To use this function, in [Event Server Setup] > [Email Event Server Setup], enter their
SMTP address and SSL port respectively. Then enter your user name and password, and the E-mail subject
as you wish.
As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as follows:
Platform SMTP SSL
Hotmail smtp.live.com 587
Google Mail smtp.gmail.com 465
Table 6-1. Webmail setting
In [Authentication Method], select [Login]. Enter a complete email address in [User Name] field:
xxxx@xxxx.com. Other SSL webmail platforms are not tested.
FTP server
Here it provides the settings of the FTP server that can be used to store event snapshots taken by the
camera when triggering of an event is detected. To start saving snapshots to a FTP server, click on the
text link to set up the FTP server. Ensure that you have put in correct server information before saving the
chanegs. You may try using the default FTP port number, 21, if you don't know the server's port number.
After that, set up the image server and then go ahead to create an event trigger and choose "FTP" as one
of the event actions. (Depending on your network environment, it may take a certain amount of time to
upload snapshots to the FTP server.)
Figure 6-16. FTP server setup example
Image server
This page allows you define the naming rules of the snapshots taken by the camera and saved to the
server or SD memory card when an event is triggered.