Operation Manual

6-10
Storex DNR-30H Network Camera
Event SetupPTZ Control
PTZ Control
Here you can manage your camera’s preset view points (or positions). And congure the patrol mode to let
the camera patrol the preset positions.
Figure 6-11. PTZ control page
Preset Points
Add Preset Points
Firstly use the arrow buttons to move the IP camera to the desired position. And then type the name into
the [Position Name] eld, and press the [Add] button. If you would like to set the position as preset Home
position,pleasecheck[Usethecurrentpositionas“Home”]button.TheHomepositioncanbeaccessed
on the live view page by pressing the Home button. If you want the camera to always return to home
position after a position change, check [Auto return to “Home“ position] , input the period of time (between
30 to 300 seconds) in which the camera stays in the new position, and press [Save] button. Then whenever
the camera changes to a new position, it will automatically return to its Home position after this period of
time expires.
Figure 6-12. Add preset points